Q. Which characteristics of our products are superior over our competitors?
A.
High Signal-To-Noise Ratio, low Distortion, great Sonic Quality, intuiitive Panel and Software controls.
Q. What makes our products superior over our competitors?
A.
We use the best and the most recent A/D, D/A and DSP in the semiconductor market. We put the potential design-in IC's into critical tests before actually occupying them into our products. We carefully select each component to make sure it fits into our high-end destination. From circuit board layout to DSP algorithms optimization, all processes are done with serious thoughts and detailed engineering. Hence, the outcome is a series of uncompromising products suitable for high-end professional audio market at a reasonable price.
Q. What makes the front panel controls so simple and easy?
A.
There is a Gain/Menu button for each channel on the front panel. By pressing the button, the rotary wheel control s the level of the corresponding channel directly. By pressing Menu or Cursor up/down, other parameters of the channel can be controlled. On top of that, you can link multiple channels to control the same parameter for all selected channels simultaneously. This saves a lot of time in programming the unit. The 4 lines x 26 characters display shows all essential parameters on one screen instead of scrolling through numerous menu screens (except for DCP-3060, which is 2 lines x 16 characters).
Q. What are the differences between all models?
A.
You can download our product comparison here to see the differences between all our models.
Q. Which outstanding features are integrated to the XConsole software?
A.
Firstly, the large graphical screen gives accurate and clear indication of the frequency response for each output. In-Gain, In-EQ, Out-Gain, Out-EQ and Crossover section can be viewed individually or in any combination. Faders can be dragged by a mouse, or the up/down buttons at the top/bottom of the faders. Text input for the desired values is also available. For EQ and Signal (Delay, Crossover, Limiter), pop-up windows are provided. On top of the mentioned editing method, on-screen editing is also provided. By using the mouse, the EQ and Crossover can be controlled graphically! There are 256 groups of Links, so it is very easy to control 2x2, 2x3, 2x4 configurations by only setting up once without duplication!
Post a question